News Center_News Center_Sichuan Huarui Potentiometer Co., Ltd.

What is a band switch?

Time of issue : 2021-12-30 09:41:27

Band switch, is a very old name. In fact, it should be called a multi-pole multi-throw switch, because it can be used not only as a band switch, but also for other purposes. As for how many knives (that is, how many sets of contacts) are needed, it depends on the needs of your circuit. Of course, at least two or more groups can be called band switches. As for how many toss (that is, how many gears) you need, it also depends on your needs. There are from 2 files to more than 10 files. If it is only used as a band switch, there are less than 4 sets of contacts, and at most 6 sets of contacts are sufficient. In terms of gears, as many bands as there are, you need as many gears, at least 2 gears. There are also various types of "band switches". The common ones are rotary, there are push-pull, and key (key) types. The volume is also large and small.

more

Band switch, is a very old name. In fact, it should be called a multi-pole multi-throw switch, because it can be used not only as a band switch, but also for other purposes. As for how many knives (that is, how many sets of contacts) are needed, it depends on the needs of your circuit. Of course, at least two or more groups can be called band switches. As for how many toss (that is, how many gears) you need, it also depends on your needs. There are from 2 files to more than 10 files. If it is only used as a band switch, there are less than 4 sets of contacts, and at most 6 sets of contacts are sufficient. In terms of gears, as many bands as there are, you need as many gears, at least 2 gears. There are also various types of "band switches". The common ones are rotary, there are push-pull, and key (key) types. The volume is also large and small.

Why can't the frequency of the external potentiometer of the inverter be adjusted up?

Time of issue : 2021-12-30 09:40:19

A frequency converter, the operation panel can be controlled normally, and the adjustment frequency can also be changed from 0 to 50HZ, but with an external potentiometer, the frequency cannot be adjusted to 20HZ, what is the reason?

more

A frequency converter, the operation panel can be controlled normally, and the adjustment frequency can also be changed from 0 to 50HZ, but with an external potentiometer, the frequency cannot be adjusted to 20HZ, what is the reason?

How to connect the three pins of the potentiometer?

Time of issue : 2021-12-30 09:39:05

A potentiometer is a resistive element with three leading ends and the resistance value can be adjusted according to a certain changing law. A potentiometer usually consists of a resistive body and a movable brush. When the brush moves along the resistor body, the resistance value or voltage that has a certain relationship with the displacement is obtained at the output end.

more

A potentiometer is a resistive element with three leading ends and the resistance value can be adjusted according to a certain changing law. A potentiometer usually consists of a resistive body and a movable brush. When the brush moves along the resistor body, the resistance value or voltage that has a certain relationship with the displacement is obtained at the output end.

How much do you know about potentiometer characteristics

Time of issue : 2021-12-30 09:38:25

The resolution of the potentiometer is also called the resolution. For the wire wound potentiometer, when the moving contact moves one circle, the output voltage changes discontinuously. The ratio of this change to the output voltage is the resolution. The theoretical resolution of the linear wire wound potentiometer is the reciprocal of the total number of turns N of the winding, and it is expressed as a percentage. The more total turns the pot has, the higher the resolution.

more

The resolution of the potentiometer is also called the resolution. For the wire wound potentiometer, when the moving contact moves one circle, the output voltage changes discontinuously. The ratio of this change to the output voltage is the resolution. The theoretical resolution of the linear wire wound potentiometer is the reciprocal of the total number of turns N of the winding, and it is expressed as a percentage. The more total turns the pot has, the higher the resolution.

Precautions for the use of potentiometers

Time of issue : 2011-02-15 00:00:00

Potentiometers are mostly made of polycarbonate synthetic resin, and should avoid contact with the following drugs. Ammonia, other amines, salty water solutions, aromatic hydrocarbons, ketones, lipids and halogenated hydrocarbons, etc.

more

Potentiometers are mostly made of polycarbonate synthetic resin, and should avoid contact with the following drugs. Ammonia, other amines, salty water solutions, aromatic hydrocarbons, ketones, lipids and halogenated hydrocarbons, etc.